#CANNON 6 V94 VISCOSITY METER ISO#
#CANNON 6 V94 VISCOSITY METER SIMULATOR#

The system shall consist of vacuum pump, moisture trap, vacuum regulator, manometer with electronic controller, bleed valve, all interconnecting tubing/piping, and any other accessories as needed to complete the vacuum system. Vacuum System – Capable of maintaining a vacuum within +/- 0.05 cm of the desired level up to and including 30 cm of mercury.The accuracy of the temperature in the bath should be +/- 0.1 C throughout the bath. Constant Temperature Bath – A suitable bath for immersion of at least 6 vacuum capillary viscometer tubes with a digital temperature controller.Although Asphalt Institute vacuum viscometer and Modified Koppers vacuum viscometer can also be used, the following refers to Cannon-Manning vacuum viscometer only.Ĭomplete Absolute Viscosity Testing Equipment conforming to IS:1206 (Part 2) Method for Testing Tar and Bitumen Materials: Determination of Absolute Viscosity with the following components: While obtaining quotations specify the following requirements. It should be noted that any other viscometer such as rotational viscometer cannot be used to measure the absolute viscosity at 60 C since the bitumen in non Newtonian in nature at this temperature. The following testing equipment is needed to measure absolute viscosity of viscosity graded paving bitumen ( IS:73-2006) at 60 C in accordance with IS:1206 (Part 2) (similar to ASTM D 2171), which uses a vacuum capillary viscometer. IS: 1206 (Part 2) – Method for Testing Tar and Bitumen Materials: Determination of Absolute Viscosity Test Equipment Viscosity standards are sold in 500 mL bottles.ABSOLUTE VISCOSITY TEST OF BITUMEN Reference Silicone viscosity standards are not recommended for glass capillary viscometers (including vacuum viscometers), metal cup-type viscometers (such as ISO, Zahn, Ford and Shell cups), or any other viscometers providing kinematic viscosity-CANNON hydrocardon-based oil standards should be used for these types of viscometers.ĬANNON silicone viscosity standards are specifically formulated for use with rotational viscometers.

CONTAINER SIZESĪll standards are shipped with an expiration date between 18 and 24 months from the date the order is processed.ĬANNON silicone viscosity standards are intended for use with rotational viscometers only. For additional details see Quality Certifications. CANNON performs calibrations using the master viscometer procedures detailed in ASTM D2162. ISO/IEC 17025 accreditation further demonstrates our technical competence in calibration including the determination of kinematic and dynamic viscosity of standards as well as viscosity certification of customer samples.

#CANNON 6 V94 VISCOSITY METER ISO#

CANNON Instrument Company holds ISO 17025 and Guide 34 accreditation (certificates 1262.02) from A2LA for competency in manufacture and certification of reference materials.

national standards for certified liquid viscosity reference standards in 2003.Īll CANNON viscosity standards are traceable to a NIST calibration and prepared in our ISO 9001-registered, A2LA-accredited laboratory. This is why the National Institute of Standards and Technology (NIST) delegated responsibility to CANNON for U.S. Use of high quality standards and reference materials ensures test reliability and accuracy.

#CANNON 6 V94 VISCOSITY METER SIMULATOR#

Our standards calibrate and verify the performance of glass capillary viscometers, automated kinematic viscometers, rotational viscometers, falling ball viscometers, cup viscometers, tapered bearing simulator viscometers and flash point testers. CANNON Instrument Company has been a leader in viscosity measurement since 1938, providing a broad range of viscosity standards and flash point reference materials to customers across various industries.

Cannon 6 v94 viscosity meter